Price : $12.50
List Price :
You Save : $7.24 (37%)
Item Description
Amazon.com Item Description
The Firex i4618 Hardwire Smoke Alarm by Kidde is an ionization smoke alarm that operates on a 120V power supply with 9V battery backup. The Firex i4618 smoke alarm provides countless rewards for installers and home owners, such as its effortless-access slide load front battery door.
This alarm is powered by your home’s electricity and will interconnect with other smoke alarms in your home. Professionals advocate interconnected alarms, for the reason that when a single sounds, they all sound, supplying an early warning against fire by significantly rising your potential to hear an alarm anywhere in your household, regardless of where the fire starts.
This alarm utilizes ionization sensing technologies. Ionization sensing alarms might detect invisible fire particles (associated with flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms can detect visible particles (connected with smoldering fires) sooner than ionization alarms. Kidde strongly recommends that each ionization and photoelectric smoke alarms be installed to assist insure maximum detection of the numerous forms of fire that can occur within the home.
Firex i4618 Hardwire Smoke AlarmUser-Friendly Attributes
- Simple access slide load front battery door
- Battery backup offers protection in case of a power failure
- Interconnectable with up to 24 devices (of which 18 can be initiating) including smoke, CO and heat alarms
Slide load front battery door provides simple access for modifying battery backup. .
The i4618 smoke alarm delivers simple and easy installation functions. .
Provides the suggested protection of an interconnected method. When 1 alarm goes off, they all do. .
Simple Installation
- Front battery pull tab allows battery activation with no removing alarm from mounting bracket.
- Significant mounting base makes mounting less difficult, protects surface paint from dirt and covers imperfections.
- Pre-stripped wiring harness with uncomplicated off cap does not need stripper tool. Tinned strands raise conductivity and wire nut grip.
Fewer Callbacks
- Large centrally situated Test/Hush¨ alarm manage button.
- Dust cover protects sensor from contaminates during construction decreasing nuisance alarms.
User Friendly Features
- Hassle-free access front loading battery door.
- Battery backup gives protection in case of power failure.
- Interconnectable with up to 24 devices (of which 18 can be initiating) which includes smoke, CO and heat alarms. See user’s guide for total directions.
Interconnectable for Enhanced SafetyFire and consumer experts suggest interconnected alarms for added protection. According to the National Fire Protection Association (NFPA), most Americans really feel they are more at danger of being a victim of a tornado than of a home fire. Essentially the opposite is true. Fires are much more standard than any other disaster that strikes a family members at residence, and can develop into deadly in minutes.
You have on typical much less than three minutes from the time you hear a smoke alarm to escape a fire. The sooner you hear an alarm, the sooner you can get out safely. Smoke alarms that link together so that when one goes off, they all go off, are named interconnected alarms. These alarms present a lot more warnings in a lot more places, giving your family members much more time to escape a property fire. Houses built soon after 1993 are expected by constructing codes to have interconnected alarms that are wired into their electrical method.
Interconnects with Other DevicesInterconnects with all Kidde, Firex, Fyrnetics, Lifesaver and Nighthawk alarms, strobe lights, and relay modules with interconnect functionality.
Trademarked Hush Feature for ConvenienceBy pressing the Hush button, you can quickly and safely silence nuisance alarms brought on by non-emergency conditions, such as overcooked dinners.
This alarm's Wise Hush function has the capability of temporarily desensitizing the alarm circuit for up to 8 minutes. This function is to be utilized only when a known alarm situation, such as smoke from cooking, activates the alarm. The smoke alarm is desensitized by pushing the Test/Hush button on the smoke alarm cover. If the smoke is not as well dense, the alarm will silence straight away. The red LED will illuminate for 1.five seconds each and every eight seconds though in hush. This indicates that the alarm is in a temporarily desensitized situation. The smoke alarm will automatically reset following approximately eight minutes and sound the alarm if particles of combustion are nonetheless present. Smart Hush can be applied repeatedly until the air has been cleared of the condition causing the alarm. Pushing the Test/Hush button on the alarm will end the hush period.
Trustworthy 9-Volt Battery Backup, Indicator LED, and Test FeatureBecause a smoke alarm only aids guard you if it really is operating, this unit attributes a red LED that flashes every single 30 to 40 seconds to indicate that it is operating properly. For further peace of mind, the alarm also consists of a test/reset button that enables you to periodically test its circuitry and horn.
The alarm’s common 9-volt battery delivers continuous protection against smoke and fire hazards, even during power outages. The unit gives a low battery warning that matters a short chirp every single 30 to 40 seconds for at least seven days just before losing power, letting you know that it's time to transform the battery.
The unit measures just five.6 inches in diameter and 1.8 inches deep, and it attributes a neutral, white finish. It includes tamper resist capabilities to deter vandalism or theft.
This alarm is UL listed, so you can be confident of its good quality, and it is backed by a five-year restricted warranty.
About Kidde: A UTC Fire Safety Brand Renowned for worldwide leadership in fire detection and suppression, Kidde delivers solutions ranging from transportable fire extinguishers to advanced industrial controls such as flame detection and explosion suppression systems.
Kidde is a UTC Fire Security brand, with a history that is rich with innovations, from the patent of the Chubb Detector Lock in 1818 to the development of the world's very first wireless networked smoke detectors in 2004.
What's in the BoxOne i4618 ionization smoke alarm with mounting bracket and mounting hardware, 1 9 volt battery, a 5-year limited warranty and a bilingual user's manual.
The 120 volt Firex 4618 Pro Simple smoke detector has an ionization Sensor, swift connect power harness, is multi-station interconnectable, has a five year warranty, and is not readily available to members in Iowa, Oregon Or Vermont.
See all Product Description
Customer Critiques
My dwelling was built in 2001, and it was equipped with Firex 120-1072B units in each room wired for interconnectivity. One of my units began to sound randomly even when there was no fire. I attempted altering the battery, but I nonetheless had the identical results. So after looking on the internet, I found that the Kidde i4618 is the present replacement model.
Right after buying the model, I was hoping that I could use an adapter in between the wiring in my Firex unit and the Kidde. But, I found that I was mistaken in what I thought I had read. I am about as unhandy a man as they come, and I seriously wasn't seeking forward to rewiring for the new unit. The hardest component of the procedure turned out getting the appropriate breaker as mine are not labeled. At least for my property (please know that yours may well properly be different), the smoke detectors were on a dedicated breaker. As soon as I discovered it and switched it off, it was very uncomplicated from there. I removed the two screws from the bracket of the Firex unit and then uncapped the wires. The Firex wires had been effortless to get rid of. I rewired black, white, and red as indicated and place the yellow caps back on to cover the wires. Then it was a rather simple matter of screwing in the new mount, connecting the wire, and twisting the Kidde unit into location. As soon as I flipped the breaker back on, anything was back to typical.
There is a single nice factor on these new units. The battery door is on the face of the unit rather than the back. The old Firex unit has the battery in the back, and it was a pain to replace the battery. One more good improvement of the Firex unit is the power connector is much easier to plug and unplug without the need of being insecure.
So if this is the replacement for your old Firex smoke alarm, don't hesitate to get this one particular from Kidde. I am pleased with the results, and I consider you will be as well. Please feel absolutely free to ask questions in the comments section beneath.
We moved into a home that was built back in 1985. Along with a multitude of other tiny fixes and updates that necessary performing, I noticed that the upstairs smoke detector was searching a tiny loose on the ceiling. Upon giving it a twist, the bracket broke, and the detector subsequently hung in a jaunty, festive way from just the wires. And I noticed that this was the ORIGINAL smoke detector, dated from 1985. Okay, there's an additional thing needing replaced.
Installation was a breeze - cut the power, pull the old a single, match the right wires on the harness (white/white, black/black, red/red), screw in the new mounting bracket, plug it in, lock it in location, turn the power back on.
BZZZZZZZZZZZZZZZZZZZZZ / BEEEEEEEEEEEEEEEEEEEEP!
Oops! The 2010 model smoke detector did not want to play properly with the other 1985 smoke detector that I hadn't even observed downstairs, and they were both going off simultaneously. Okay, swap that one out too, and... blissful silence, and a comforting green light shines from every 1.
Trust me: if I could install this, Anybody can install this. I cannot even hammer a nail straight.
Related Product
No comments:
Post a Comment